Home Page
Back

SEC - Areas of Expertise
Product Testing

Closeup view of the dial indicator being used to measure the concentricity of the outer ferrule of a failed marine hose. Exemplar 8-inch diameter, 150-pound class marine hose assembled in the dynamic presure test JIG with 70 psi system pressure.
A view of the water inlet fittings, the pressure gauge assembly and the high point bleed valve on flange #2 during a presure test of the exemplar marine hose. A view with the 27" bend radius template on the #1 flange hose loop with 70 psi system pressure. The actual bend radius at this pressure was approximately 23 inches, which exceeded the hose's limits.
Seasoned Engineering Consultants, Inc. · 500 North Shoreline Blvd, Suite 809 · Corpus Christi, TX 78471-1002 · Phone: (361) 887-9388 Fax: (361) 881-9899 sec_inc@seasonedengineering.com